How To Properly Select And Use Commercial High Ice Efficiency Flake Ice Machine A?

1, the High Ice Efficiency Flake Ice Machine should be installed away from the heat source, no direct sunlight, good ventilation, the ambient temperature should not exceed 35 degrees Celsius, to prevent the ambient temperature is too high, resulting in poor condenser heat dissipation, affecting the ice making effect. The floor on which the ice machine is installed should be solid and flat, and the ice machine must be level, otherwise it will cause no ice and noise during operation.

2. The gap between the back and left and right sides of the Seafood Markets Flake Ice Machine should be no less than 30cm, and the top gap should be no less than 60cm.

3, the ice machine should use independent power supply, dedicated line power supply and equipped with fuses and leakage protection switches, and must be reliably grounded.

4. The water of the ice machine should conform to the national drinking water standard, and a water filtration device should be installed to filter the impurities in the water to avoid blocking the water pipe and polluting the water tank and the ice mold. And affect the performance of ice making.